 |
Kenwood's flagship 1,200W four channel
power amplifier designed for driving
subwoofer speakers, featuring Dual-Sigma
(Σ) drive to provide bridged output
with an excellent damping factor |
|
New K-STAT
technology with a slimmer, more compact
chip design reduces thermal resistance
but increases power for improved sound
quality |
|
Dual power supply
with two transformers ensures steady
operation even when the positive and
negative loads are unstable |
|
Class-D digital
circuit design allows for small overall dimensions
and less waste heat, without
any sacrifice in performance |
|
|
Class D four
channel power amplifier |
|
Load capability: 2Ω
stable |
|
Maximum Power Output
(4Ω): 2400W x 1 |
|
Rated Power Output
(4Ω, 14,4V): 100W x 1 (20Hz ~ 200Hz,
0.05%THD) |
|
Rated Power Output
(2Ω, 14,4V): 150W x 4 (1000Hz, 0.5%THD) |
|
Bridged Power Output
(4Ω, 14,4V): 300W x 2 (1000Hz, 0.5%THD) |
|
Rated Power Output
(4Ω, 12V): 75W x 4 (20Hz ~ 200kHz,
0.05%THD) |
|
Rated Power Output
(2Ω, 12V): 100W x 4 (1000Hz, 0.5%THD) |
|
Rated Power Output
(CEA-2006): 100Watts RMS x 4 at 4 ohms
and 1% THD |
|
Low-pass filter
(40~200Hz) (24dB/oct) |
|
High-pass filter
(50~200Hz) (12dB/oct) |
|
Infrasonic filter
(Off / 15 / 60Hz) (24dB/oct) |
|
Phase inverter
0°(Normal) / 180°(Reverse) |
|
Built-in Full
Function DSP |
|
Switched-mode power
supply with power MOS-FET and cooling
fan |
|
Amplifier information display and
power indicator |
|
Installer memory
plus last settings memory |
|
Line in: 2 RCA (gold
plated) A / B |
|
Input selector: A /
AB |
|
Line out: 1 RCA
(gold plated) |
|
Line out filter |
|
Single side
terminals |
|
Full contact
terminals |
|
Gold plated power &
speaker terminals |
|
Die-cast aluminium
heat sink with removable coverplate |
|
Input sensitivity:
0.2 ~ 5V, impedance: 10kΩ |
|
Signal to Noise
ratio: 105dB |
|
Current consumption: 75A |
|
Dimensions 340W x
60H x 225D (mm), weight: 3.8kg |
|
Supplied with full
fitting & operating guide |
