 |
Kenwood's flagship 2,400W single channel
power amplifier designed for driving
subwoofer speakers, featuring Dual-Sigma
(Σ) drive to provide bridged output
with an excellent damping factor |
|
New K-STAT
technology with a slimmer, more compact
chip design reduces thermal resistance
but increases power for improved sound
quality |
|
Dual power supply
with two transformers ensures steady
operation even when the positive and
negative loads are unstable |
|
Class-D digital
circuit design allows for small overall dimensions
and less waste heat, without
any sacrifice in performance |
|
|
Class D single
channel power amplifier |
|
Load capability: 1Ω
stable |
|
Maximum Power Output
(4Ω): 2400W x 1 |
|
Rated Power Output
(4Ω, 14,4V): 600W x 1 (20Hz ~ 200Hz,
0,5%THD) |
|
Rated Power Output
(2Ω, 14,4V): 1200W x 1 (100Hz, 0,5%THD) |
|
Rated Power Output
(1Ω, 14,4V): 1000W x 1 (100Hz, 1%THD) |
|
Rated Power Output
(4Ω, 12V): 400W x 1 (20Hz ~ 200kHz,
0,5%THD) |
|
Rated Power Output
(2Ω, 12V): 800W x 1 (100Hz, 0,5%THD) |
|
Rated Power Output
(CEA-2006): 600Watts RMS x 1 at 4 ohms
and 1% THD |
|
Low-pass filter
40~200Hz (24dB/oct) |
|
Bass boost circuit
and infrasonic filter (Off / 15 / 60Hz)
(24dB/oct) |
|
Band reject filter
(Off / 6dB / 12dB) (40~200Hz Variable) |
|
Phase inverter
0°(Normal) / 180°(Reverse) |
|
Dual sigma drive |
|
Dual switched-mode
power supply with cooling fan |
|
Amplifier
information display with power indicator |
|
Installer memory
plus last settings memory |
|
Line in: 1 RCA (gold
plated) , Line out: 1 RCA (gold plated) |
|
Line-out filter |
|
Single side
terminals |
|
Full contact
terminals |
|
Gold plated power &
speaker terminals |
|
Die-cast aluminium
heat sink with removable coverplate |
|
Input sensitivity:
0.2 ~ 5V, impedance: 10kΩ |
|
Signal to Noise
ratio: 105dB |
|
Current consumption: 75A |
|
Dimensions 340W x
60H x 225D (mm), weight: 3.8kg |
|
Supplied with full
fitting & operating guide |
