 |
Oversized 250mm
subwoofer suitable for sealed /
ported band pass type enclosure |
|
Peak
input power 1,000W (500 + 500W) |
|
Rated power 250W |
|
PP
hybrid woofer cone with high-roll butyl
rubber surround |
|
Single piece die-cast aluminium chassis
basket offers excellent strength and
highly efficient thermal conduction
allowing reproduction of stable audio
with reduced resonances |
|
Dual stage magnet construction allows
reproduction of doubly low frequencies
and provides a more powerful oscillating
plate drive |
|
Dual voice coils feature means the
subwoofer contains two independent voice
coils. These voice coils can be
connected in several different
configurations. A parallel connection
will produce a 1 ohm load to the
amplifier, a series connection can be
used when connecting more than one
subwoofer, or with a bi-amp drive
allowing different amplifier channels to
drive separate voice coils in the same
speaker |
|
Frequency
response 27 - 400 Hz |
|
Sensitivity
91dB/W at 1m |
|
Mounting
depth 133mm |
|
Recommended sealed box capacity 22
litres |
|
Recommended ported box capacity 28
litres with 76 mm x 102 mm port |
|
Complete
with shorting cable link, full fitting guide |
